The compact telehandler
The compact Weidemann telehandlers are unique in the combination of lift height, width and machine capacity. With the all-wheel drive and all-wheel steering, you are absolutely stable and well-equipped for many different tasks. Those who drive a Weidemann telehandler simply will no longer give it up.
All-wheel steering, low centre of gravity and excellent stability
Thanks to the all-wheel steering and the undivided chassis, Weidemann telehandlers are particularly manoeuvrable and very stable. The low centre of gravity of the machine supports the stability even more.
High quality powder coating
Quality creates added value. The powder coating is a key feature of the Weidemann quality standard. In contrast to the conventional wet painting, it greatly increases the service life and is more efficient and also environmentally friendly in the process.
Driver assist system vls (Vertical Lift System)
The vls (Vertical Lift System) makes a fluid working principle possible and, through a partially-automated telescoping movement, supports the work in a complex operating environment. The machine’s stability is improved with the approximate vertical lifting and lowering movements. The vls has proven itself well in the area of agriculture and our innovation received several international awards.
Sturdy telescopic arm and enormous lift height
The telescopic arm is designed to be sturdy and stable and is placed in the centre of the machine, which causes little distortion. The parallel motion takes place hydraulically. The sliding components in the inner pipe of the telescopic arm are maintenance free. All important hydraulic lines are well protected against external influences. With our compact Weidemann telehandlers, you reach amazing lift heights with the best stability and compact dimensions.
High shear forces from planetary axle
The drive via the planetary axle increases the torque on the wheel and thereby improves the shear force. Due to the optimal ratio between the shear force and machine capacity, you work flexibly and economically at the same time.
100% differential lock
If necessary, the up to 100% connectable differential lock offers you maximum traction and shear force and keeps the tyre wear low (switched off during normal operation).
Power take off and three-point rear tool holder
Optionally, the Weidemann telehandlers can be outfitted in the rear with a power take off and three-point rear tool holder. In combination with corresponding rear hydraulics, these options make it possible to operate rear attachments. This makes your machine even more flexible in use.
Compact design, compact dimension
Telehandlers from Weidemann are built extremely compactly. The width and height of all machines is less than 2 metres. That is why our telehandlers are also ideal for use in confined spaces and are therefore unique in their combination of lift height, width and machine capacity.
Small inside radius
All telehandlers in our series, from the T4108 to the T6025, have particularly small inside radii. The manoeuvrability achieved in this way makes the machines into all-rounders on every application site.
The Weidemann telehandlers T4108 and T4512 can be easily transported on a 3.5 tonne trailer – including attachments. In this way, the machines are quickly and variably on the go from job to job.
Planetary axle PAL 1155
Hydrostatic all-wheel drive, travel direction can be selected via joystick
Service brake: Hydrostatic drive system acting on all 4 wheels (wear-free)
Central service and parking brake in the drive train acting on all 4 wheels
tyres 10.0 / 75 – 15.3 AS ET-40
Hydraulic all-wheel steering, steering angle 2 x 38°
3rd Control circuit front DN10
Hydraulic oil cooler
VLS (Vertical Lift System)
Canopy with retaining system ROPS / FOPS tested, window on right side
Comfort seat with safety belt and air cushioning
Joystick with direction control switch and integrated touch button for telescoping function
Operating hour meter
battery isolator switch
Mechanical quick-change system for attachments
Weidemann T4512 Dimensions
- Total length 3.879 mm
- Total length (without bucket) 2.916 mm
- Axle middle to bucket pivot pin 425 mm
- Wheelbase 1.920 mm
- Rear overhang 391 mm
- Height to top of overhead guard fixed 1.940 mm Height to top of cabin 1.940 mm
- Seat top height 974 mm
- Total working height 5.211 mm
- Height of bucket pivot (max.) 4.503 mm
- Load-over height Retracted telescopic arm 2.909 mm
- Load-over height Extended telescopic arm 4.123 mm
- Dumping height Retracted telescopic arm 2.375 mm
- Dumping height Extended telescopic arm 3.589 mm
- Operating distance for M 543 mm
- Digging depth 92 mm
- Total width 1.560 mm
- Track width 1.296 mm
- Ground clearance 290 mm
- Maximum radius external 3.398 mm
- Radius at the outer edge 2.607 mm
- Inside turning radius 821 mm
- Rollback angle at max. lifting height 52 °
- Dumping angle (max.) (max.) 31 °
- Rollback angle (on the ground) 44 °All values with a standard bucket and standard tyres
|Small engine||Large engine|
|Engine performance (max.) kW (hp)||22.6 ( 31 )||29.6 ( 40 )|
|at rpm (max.) rpm||3,000||2,800|
|Cubic capacity cm³||1,331||1,496|
|Operating voltage V||12||12|
|Operating weight (standard) kg||2,700||2,700|
|Payload (max.) kg||1,200||1,200|
|Axle||PAL 1,155||PAL 1,155|
|Cab (optional)||FSD (cab)||FSD (cab)|
|Ground speed km/h||0 – 20||0 – 20|
|Fuel tank capacity l||25||25|
|Hydraulic oil tank capacity l||40||40|
|Total carriage rotation angle °||148||148|
|Total pivoting angle °||14||14|
|Steering angle (max.) °||2 x 38||2 x 38|
|Lifting cylinder: raise / lower sec||6.1 / 4.8||6.1 / 4.8|
|Extension cylinder: extend / retract sec||4.9 / 3.9||4.9 / 3.9|
|Tipping cylinder: crowd / tilt sec||2.6 / 2.3||2.6 / 2.3|
|External services – Operating pressure bar||360||360|
|Steering hydraulics – Oil flow (optional) l/min||42 ( 75 )||40 ( 70 )|
|Steering hydraulics – Operating pressure bar||220||220|
|Type of drive||Hydrostatic||Hydrostatic|
|Traction drive||Universal joint shaft||Universal joint shaft|
|Average sound power level LwA dB(A)||97.7||99.3|
|Guaranteed sound power level LwA dB(A)||101||101|
|Specified sound pressure level LpA dB(A)||84||84|
FSD = canopy
Second values measured without vls (vertical lift system)
Vibrations (weighted average effective value)
Hand-arm vibrations: The hand-arm vibrations are no more than 2.5 m/s²
Whole body vibrations: This machine is equipped with a driver’s seat that meets the requirements of EN ISO 7096:2000.
When the loader is properly used, the whole body vibrations vary from below 0.5 m/s² up to a short-term maximum value.
It is recommended to use the values specified in the table when calculating the vibration values according to ISO/TR 25398:2006. At the same time the actual use conditions have to be taken into consideration.
telehandlers, like wheeled loaders, are to be classified by operating weight.
|Average value||Standard deviation (s)|
|Type of loader||Typical operating conditions||1.4*aw,eqx||1.4*aw,eqy||aw,eqz||1.4*sx||1.4*sy||sz|
|Compact wheeled loader
< 4,500 kg)
|Load & carry (load and transport work)||0.94||0.86||0.65||0.27||0.29||0.13|
> 4,500 kg)
|Load & carry (load and transport work)||0.84||0.81||0.52||0.23||0.2||0.14|
|Application in extraction (harsh application conditions)||1.27||0.97||0.81||0.47||0.31||0.47|